If you consider the choice between low-budget models of monitors and TVs, it is better to buy the first option. Television equipment with a small diagonal of well-known and not so-well-known brands has been degrading since 2015. The reason for this is the focus on users who need a large screen, so other models are left without innovation. Such TVs do not have smart platforms and ports to connect to other devices. It is difficult to play with this technique because every click comes into play with a delay.
How to Connect an SSD to a Desktop Computer?
It is not difficult to connect laptop ssd to the desktop computer. To do this, the user will need to de-energize the system, as well as disassemble it. To access the PC components and replace or replace the hard disk drive, you will need to remove the system unit panel. In some cases, the user will need to disassemble the entire block. This is usually required by small models (e.g. DELL OptiPlex 3040 SFF).
The SSD drive is installed in a free place by means of the special adapter executed in the form of a sled and attached by screws. Fasteners are supplied with the drive included. An adapter is necessary because the form factor of the media may be smaller than the size of the slot. For example, the classic tray is designed for a 3.5-inch part and the most common size of solid-state devices – 2.5 “- as in the SAMSUNG 2.5” 750 EVO 120GB.
When the disk is inserted, you need to connect the SSD with a SATA cord to the “motherboard”, selecting the appropriate slot on it. Then the SSD should be connected to the power supply, which ensures the smooth operation of all computer components.
So, the battery is removed, unscrewing the cover. It’s time to remove the hard drive: the drive is fastened with several bolts, they must be unscrewed, and then carefully remove the hard drive from the SATA slot. In this place, you will need to install solid-state media and secure the SSD with bolts.
Three Best SSDs for Upgrading Your Laptop
- WD Black SN750 NVMe SSD. When the disk is inserted and the system is assembled, the SSD must be configured for the media to function properly. To do this, you need to go into the BIOS, find solid-state media there, and if this drive is an addition to the hard drive – put the SSD first in the list. Thus SSD will become the main one.
- Toshiba OCZ RD400. As soon as the installed SSD became the first in Bios, it is necessary to confirm changes, and then – reinstall an operating system. You can simply copy the OS to the media if there is an HDD or the user does not plan to leave the SSD as a system drive.
- Kingston KC2000. To put the drive in the laptop, the user should arm himself with a thin screwdriver and unscrew the screws that are on the back cover of the device. They close the cover, which protects the hard drive and RAM of the laptop.